single shaft shredder in plastic crusher machine plastic Grinder
Machine
plastic crusher machine As recycling equipment for waste plastics,PP/PE/PET/LDPE Plastic Crusher/ Shredder/ Grinder Machine is mainly used for breaking plastic
material, such as pet bottle, plastic sheet ,plastic profile and
plastic pipe, sheet, etc.
Applicable to the crushing and reuse of various plastics,
especially for all types of rigid plastics (such as material heads,
shoes, etc.).
Plastic Crusher
The plastic crusher is easy to operate, the tool change is simple and convenient, and
the tool holder is optimized. The claw cutter can disperse the
force and make the shear force of each knife increase. It is
suitable for crushing thick materials, hard material blocks,
material heads, etc. The tool cutting force is improved and the
tool wear is reduced. The electronically controlled safety design
is provided. The hopper adopts a double-layer structure and is
filled with sound-insulating material, so that the equipment has
good safety and environmental protection, and is power-saving and
durable. 1, all-steel welding base, sturdy and durable.
2, easy to disassemble design, easy cleaning and maintenance.
3, imported Ming-steel tools, sharp edges, easy replacement,
durable.
4, smash all kinds of soft and hard plastic, easy and easy.
5, with motor over-planting and electrical chain protection system
to ensure safe use.
6, can choose different tools and different holes through the
screen.
| Model | Power(KW) | Dimension of feeding part (mm) | Crushing capacity (kg/h) | Rotary cutter | Stationary cutter | Dimension of machine (mm)
| Weight (Kg) |
| XT-200 | 2.2 | 200×210 | 20-80 | 9PCS | 2PCS | 550*420*1000 | 150 |
| XT-250 | 4 | 250×210 | 130-250 | 9PCS | 2PCS | 750*620*1040 | 280 |
| XT-300 | 5.5 | 310×220 | 200-300 | 9PCS | 2PCS | 850*680*1220 | 350 |
| XT-400 | 7.5 | 410×240 | 400-500 | 12PCS | 2PCS | 880*840*1300 | 450 |
| XT-500 | 11 | 510×320 | 500-600 | 6PCS | 2PCS | 1100*1000*1520 | 650 |
| XT-600 | 15 | 610×320 | 600-800 | 18PCS | 2PCS | 1200*1120*1630 | 850 |
| XT-630 | 22 | 630×340 | 700-800 | 27PCS | 4PCS | 1200*1120*1630 | 1000 |
| XT-700 | 30 | 710×480 | 800-900 | 21PCS | 4PCS | 1300*1380*2030 | 1450 |
| XT-800 | 37 | 800×480 | 800-1000 | 24/12PCS | 4PCS | 1900*1580*2200 | 2000 |
Maintenance for crusher
1. The plastic crusher should be placed in a ventilated position to
ensure that the motor working heat is dissipated and its life is
extended.
2. Lubricate the bearing regularly to ensure the lubrication
between the bearings.
3. Check the tool screws regularly. After using the new plastic
crusher for 1 hour, tighten the movable knife with the tool and fix
the screws of the knife to enhance the fixing between the blade and
the knife holder.
4. In order to ensure the sharpness of the tool incision, the tool
should be inspected to ensure its sharpness and reduce unnecessary
damage to other components caused by the blunt blade.
5, when changing tools, the gap between the moving knife and the
fixed knife: 20HP more than the best 0.8MM crusher, 20HP following
0.5MM better than the crusher. The thinner the recycled material,
the larger the gap can be.
6. Before the second start, the remaining scraps in the machine
room should be cleared to reduce the starting resistance. The
inertial cover and pulley cover should be opened periodically to
remove the ash outlet below the flange. The plastic crusher chamber
discharges the powder into the shaft bearing.
7. The machine should be well grounded.
8. Regularly check whether the plastic crusher belt is loose and
tighten it in time.
